aftrtcare | Blade Lab

Aftercare guide

Blade Lab product is designed to deliver years of superior performance, especially when cared for properly.

General Care For Your Chair

Maintaining your chair is simple and ensures it stays stylish and comfortable for years. Follow these easy tips to keep it in top condition:

Follow Usage Instructions

Designed only for sitting or relaxing, improper use such as standing or jumping can cause damage or injury. Use your chair responsibly.

Keep It Clean

Regularly wipe the chair's fabric with a slightly damp cloth to remove sweat and dirt, which can damage the PU leather coating. Promptly clean spills to avoid lasting stains.

Don't Sit Naked

Avoid sitting with bare skin exposed, as body oils and friction can degrade the PU leather coating over time.

Avoid Contact with Moisture

Moisture harms the PU leather. Wipe off any spills immediately and refrain from using the chair with wet clothes or a damp body.

Don’t Abuse It

While built for durability, the chair isn’t indestructible. Avoid dropping it, hitting it, or exposing it to sharp objects to maintain its quality.

Avoid High Heat

Keep the chair away from high-heat sources like hair dryers or direct sunlight, as these can damage the coating and affect its shine or color.

Keep Pets Away

The PU leather coating isn’t claw or bite-proof, so keep pets at a safe distance to prevent damage.

Inspect and Maintain Regularly

Check for loose screws, wear, or damage periodically. Tighten screws and address any issues promptly to maintain optimal performance.

Safety Usage Tips for Your Chair

Follow these 8 tips to use your chair safely and extend its life:

Sit Properly

Always sit upright with your back fully supported by the backrest and your feet flat on the floor.

Avoid Sitting on the Edge

Do not sit on the chair’s front edge, as it can destabilize the chair and cause damage.

Don’t Stand or Kneel on the Chair

Never stand on the chair seat. It’s not designed to support weight in this way and may lead to injury or damage.

One Person at a Time

Avoid sitting on the chair with another person simultaneously, as it’s not built to handle extra weight beyond its specified capacity.

Don’t Push an Occupied Chair

Avoid pushing the chair when someone is sitting on it, as this can lead to accidents or damage.

Be Careful with Reclining

Don’t press down on the backrest while someone is reclining, as it may damage the mechanism.

Distribute Your Weight Evenly

Avoid leaning your entire body weight solely on the backrest to prevent instability or damage.

Watch Your Fingers

Keep hands and fingers away from the reclining mechanism to avoid injuries.

General Care For Your Smart Desk

Keep your smart desk in excellent condition by following these 8 essential care tips:

Use as Intended

Always use your desk for its designed purpose. Improper use can lead to damage or even injuries.

Clean with Care

Wipe the desk surface with a slightly damp cloth and a mild soap solution to remove dirt. Dry immediately with a clean cloth.

Avoid Overloading

Do not place items exceeding the desk's maximum weight capacity, as it may affect functionality and stability.

Avoid Harsh Cleaning Products

Do not use abrasive cleaners or scrubbers, as they can damage the powder-coated finish and expose the metal to rust.

Prevent Rough Handling

Avoid impacts, dropping objects, or using sharp tools that could scratch or damage the desk.

Protect from Heat and Sunlight

Keep the desk away from direct sunlight and heat sources to prevent fading, cracking, or warping.

Shield Against Heat and Liquids

Never place hot items directly on the desk surface -use mats or coasters. Keep liquids away from the desk frame and electrical components to avoid damage.

Avoid Tampering with Electrical Parts

Do not open or tamper with the Control Box, Control Panel, Leg Columns, or Motors. If repairs are needed, contact customer support. Disconnect the desk from power before cleaning electrical areas.

Upholstery Care

To keep your Blade Lab chair looking and feeling great, regular cleaning and care are essential. Below are specific instructions based on the materials used in the chair's construction.

PU Leather

For chairs made with PU leather, the material is both durable and stain-resistant, making it simple to care for.

Use a slightly damp microfiber towel to gently wipe down the leather surface.

After cleaning, allow the chair to air dry completely to avoid any moisture buildup.

Air Threads Fabric

Chairs made with Air Threads Fabric require a bit more attention to maintain their appearance.

Quickly absorb any spills by blotting the area with a dry paper towel or cloth.

Regularly vacuum the fabric to remove dust and dirt.

For stubborn stains, apply a small amount of fabric cleaner to a microfiber cloth and gently wipe the area.

Note: Avoid rubbing the fabric, as it may worsen the stain.

Mesh Chairs

The breathable mesh material used in Blade Lab chairs is designed for comfort and durability, but it also requires some upkeep.

Regularly vacuum the mesh to remove dust and debris.

If liquid spills occur, blot the area immediately with a clean cloth to absorb any excess.

For stains, use a mild fabric cleaner or a soapy solution on a damp cloth and wipe the area carefully.

Allow the mesh to air dry completely before using the chair again.

Tip: Avoid harsh chemicals or abrasive materials to preserve the mesh's integrity.

Functional Components

Blade Lab chairs are built with precision-engineered components, including armrests, tilt mechanisms, and hydraulic systems. These parts are designed to function smoothly with minimal maintenance when used appropriately.

To keep these components in good working condition, avoid applying excessive force or using the chair beyond its intended purpose.

If you encounter any issues with the functionality of these parts, our support team is here to help.

For chairs still under warranty, we’ll gladly provide replacement parts if necessary to ensure your chair remains in optimal condition.

Warranty Assistance & Support

If you experience any issues with your Blade Lab chair, our team is ready to assist you.

To help us address your concern quickly, please provide clear photos or videos that illustrate the problem.

For detailed information on what is covered under your warranty, be sure to visit our Warranty Information page. Should you have further questions, reach out to us directly through our Support Forum—we’re here to help ensure your chair meets your expectations.